Adhesive instructions for wall tattoos
- Our wall tattoos are ideally suited for gluing indoors and on all smooth surfaces: eg woodchip wallpaper, tiles, glass, plastic and ceramics. The surface must be free of dust, grease, silicone and latex.
- For freshly painted walls, you should wait about 3 weeks before applying the wall tattoo.
- If you cannot attach your wall tattoo in a timely manner, please do not store the wall tattoo for longer than 4 weeks.
Step 1:
Lay out the tattoo on a smooth and firm surface. If your motif consists of several parts, cut them apart.
Step 2:
Use the squeegee or a PVC card to press the transparent film smoothly and firmly onto the motif.
Step 3:
Now slowly and carefully peel off the backing paper at a very acute angle.
Step 4:
Slowly and carefully pick up the transfer film at each end with both hands.
Step 5:
For larger motifs, it is always advisable to work with 2 people. The transfer foil must always be kept smooth and under slight tension.
Step 6:
Position your motif where you want it and press one corner of the transfer film firmly against the wall.
Step 7:
Now start pressing the wall tattoo firmly onto the wall from the center outwards with the squeegee.
Step 8:
Now you can carefully pull the transparent backing film flat off the wall at an acute angle.
Adhesive instructions for murals
Applying a mural is very easy! Please make sure beforehand that your wall is free of dust, grease, latex, acrylic and silicone. Leave freshly painted and wallpapered walls to dry at least ten days beforehand.
Step 1:
You will need: scissors, squeegee and a cloth
Step 2:
Cut the individual elements apart with scissors.
Step 3:
After the position on the wall is determined, peel off the sticker from the paper and stick it gently.
Step 4:
Using a felt squeegee or a credit card wrapped in a kitchen towel, carefully stroke the sticker.
Adhesive instructions for car stickers
Do not polish or treat vehicles with hot wax before applying the stickers. Only stick on freshly painted car parts after a drying time of 4 weeks. For larger motifs, it is advisable to work with 2 people. The bonding temperature should be approx. 15°C to 22°C. Please avoid strong sunlight to prevent overstretching of the film.
Step 1:
Clean the surface to be glued (e.g. with spirit), it must be free of grease, wax and silicone.
Step 2:
Place your car sticker on a smooth and solid surface and cut it apart if necessary.
Step 3:
Use a squeegee to smooth the transparent film over the motif.
Step 4:
Position your decal where you want it and secure it to the vehicle with painter's tape.ea review.
Step 5:
Carefully remove the white backing paper from the motif at a flat angle.
Step 6:
Now use the squeegee to evenly apply the sticker to the vehicle from top to bottom.
Step 7:
You can now carefully cut through the film at gaps with a cutter knife. Please avoid damage to the paintwork.
Step 8:
Gently peel off the clear film at a shallow angle. Complete!